Rear-right combination lamp

Restore factory safety lighting and modern styling on your Suzuki SX4 S-Cross with the genuine 35650-61M10 rear-right combination lamp. This complete unit slots into the quarter-panel aperture, delivering bright stop, tail and indicator functions while sealing out moisture for long-term reliability. 

114.70 EUR
ar PVN 21%
Noliktavā 1
Available The item is on site at our office - you can pick it up right away.
Kods 3565061M10
Ražotājs SUZUKI

Rear-Right Outer Tail-Lamp Assembly 35650-61M10

Restore factory safety lighting and modern styling on your Suzuki SX4 S-Cross with the genuine 35650-61M10 rear-right combination lamp. This complete unit slots into the quarter-panel aperture, delivering bright stop, tail and indicator functions while sealing out moisture for long-term reliability.

Key Benefits

  • OEM Precision Fit – moulded mounting tabs and wiring plug match the factory body shell; no drilling, splicing or coding required.

  • Bright, Road-Legal Output – crystal-clear polycarbonate lens and precision reflectors ensure compliant beam patterns and vivid daytime visibility.

  • Halogen + LED Hybrid – combines cost-effective halogen bulbs for brake/indicator with long-life LED position light for a contemporary look.

  • UV-Stabilised Lens – hard-coat resists yellowing, stone-chip haze and harsh weather.

  • Two-Year Suzuki Warranty – confidence backed by factory parts coverage.

Vehicle Compatibility

ModelPlatformProduction YearsPosition
Suzuki SX4 S-CrossJY/JYA (AKK416)2013 → 2016Rear outer, right-hand (passenger side on LHD)


Always match the stamped part number 35650-61M10 on your original lamp or verify via VIN before ordering.

Technical Specifications

SpecDetail
OEM Part No.35650-61M10
FunctionStop, tail, indicator, reflector
Bulb TypesP21/5W stop/tail, PY21W indicator (bulbs not included)
Lens ColourRed / clear
HousingABS with integrated gasket
Connector3-pin factory plug
ApprovalECE-R6, R7 compliant
Warranty24 months


Installation Snapshot

  1. Open the tailgate and remove the two rear-lamp retaining screws.

  2. Pull the lamp rearward to release locating pins.

  3. Disconnect the 3-pin wiring plug.

  4. Seat the new lamp; reconnect plug and press until locator pins engage.

  5. Re-install screws (torque 3 Nm) and test all lighting functions.

Specifikācija nav atrodama

0 Atjaunināts