Door-handle LED module
Brighten the ground beside your BMW and restore that premium welcome glow with the genuine door-handle LED module. Part number 63315A884A2 replaces dim or failed courtesy lamps mounted behind each exterior handle, projecting a crisp white pool of light onto the pavement whenever you unlock the car.
BMW LED Courtesy-Light Module 63315A884A2
Brighten the ground beside your BMW and restore that premium welcome glow with the genuine door-handle LED module. Part number 63315A884A2 replaces dim or failed courtesy lamps mounted behind each exterior handle, projecting a crisp white pool of light onto the pavement whenever you unlock the car.
Key Benefits
-
Factory-perfect fit – locator tabs and two-pin micro-plug align exactly with the handle carrier; swaps in under five minutes per door.
-
Precise OEM colour temperature – 5 500 K diode matches head-lamp DRLs for a uniform, modern look.
-
Sealed electronics – conformal-coated PCB and polycarbonate lens withstand road-salt spray and high-pressure washing.
-
Low-power consumption – draws < 1 W, preserving battery life during prolonged courtesy-light cycles.
-
BMW 24-month warranty – confidence that the module meets stringent factory durability standards.
Vehicle Compatibility
| Model | Chassis Codes | Model Years | Position |
|---|---|---|---|
| BMW X3 (incl. X3 M) | G01 (G08) / F97 | 2019 → 2025 | Exterior door handles – all doors |
| BMW X4 (incl. X4 M) | G02 / F98 | 2019 → 2025 | Exterior door handles – all doors |
| BMW X5 (incl. X5 M) | G05 / F95 | 2019 → 2025 | Exterior door handles – all doors |
| BMW X6 (incl. X6 M) | G06 / F96 | 2019 → 2025 | Exterior door handles – all doors |
Technical Specifications
| Specification | Detail |
|---|---|
| BMW Part No. | 63 31 5 A88 4A2 (63315A884A2) |
| Light source | Surface-mount white LED array, 5 500 K |
| Housing | UV-stabilised polycarbonate, clear lens |
| Input voltage | 12 V DC (BMW LIN-bus ready) |
| Current draw | < 80 mA |
| Sealing | IP67 dust & water resistant |
| Supersedes | 63 31 5 A37 319, 63 31 9 459 826 |
| Warranty | 24 months, unlimited mileage |
-
Insert a plastic trim tool under the rear edge of the door-handle lamp and pry outward to release the clip.
-
Disconnect the two-pin micro-plug from the old module.
-
Connect the new lamp; ensure the plug clicks into place.
-
Angle the front tongue into the handle housing, then press the lamp until it snaps flush.
-
Test by unlocking the car – the new LED should illuminate instantly.
Specifikācija nav atrodama