Windscreen 56101-3Y959

Maintain uncompromised visibility and cabin protection with the genuine windscreen (part 56101-3Y959). This factory-spec laminated glass assembly features advanced coatings and interlayers to shield occupants, reduce noise and ensure a perfect seal to your Toyota’s A-pillar and roof flange.

Key Benefits

• Exact OEM Fit
  Precision-cut dimensions and mounting flange profile guarantee drop-in replacement—no trimming or adjustments required.

• Laminated Safety Glass
  Dual-layer construction with a polyvinyl butyral (PVB) interlayer holds fragments together on impact, reducing injury risk.

• UV-Filtering Band
  Tinted upper edge blocks harmful ultraviolet rays, shielding occupants and interior materials from sun damage.

• Acoustic Insulation
  PVB interlayer dampens exterior noise for a quieter cabin and improved audio clarity.

• Optical Clarity
  Low-iron float glass and state-of-the-art coating deliver distortion-free vision and superior scratch resistance.

Technical Specifications

• Part Number: 56101-3Y959

• Type: Laminated automotive windshield

• Glass Thickness: 4.0 mm total (2 × 1.8 mm glass + 0.4 mm PVB)

• UV Band: 50 mm tinted strip across top edge

• Acoustic Rating: Class A sound dampening per ISO 10534-2

• Mounting Style: U-channel flange with factory adhesive bead

• Compatibility: Fits Toyota models specifying this glass code (verify via VIN)

• Warranty: 24 months against delamination and material defects

Installation Overview

1. Remove Trim & Old Glass: Carefully detach moulding and cut through the urethane adhesive bead.

2. Prepare Flange: Clean and prime the pinch weld flange per Toyota RS Urethane Guide.

3. Apply Adhesive: Dispense OEM-approved windshield urethane in a continuous bead using the correct nozzle.

4. Position Windscreen: Lift into place, aligning mounting flange with the urethane bead; press gently to seat.

5. Reinstall Trim: Replace mouldings and clips, ensuring even contact around the perimeter.

6. Cure & Test: Allow urethane to reach handling strength (minimum 1 hour), then verify seal integrity with a water test.