Connector Pipe P326289

Ensure reliable fluid routing and leak-free performance with the genuine connector pipe (part P326289) from PREXAparts. This precision-engineered tubing delivers exact OEM fitment and robust construction to maintain system integrity in demanding automotive applications.

Key Benefits

• Exact OEM Dimensions
  Mandrel-bent and machined to match factory routing—even complex curves and lengths require no modification or adapters.

• High-Strength Steel Construction
  Resists pressure pulsations and mechanical stress; engineered from alloy steel with uniform wall thickness for durability.

• Corrosion-Resistant Finish
  Zinc-nickel plating or e-coat protects against moisture, road salts and chemical exposure for extended service life.

• Leak-Proof Sealing
  Precisely sized ends and integrated flares or O-ring grooves ensure consistent, reliable seals under all operating conditions.

• Versatile Applications
  Ideal for coolant, fuel return, vacuum or air conditioning lines where part P326289 is specified.

Technical Specifications

• Part Number: P326289

• Material: Alloy steel tubing with protective coating

• Outer Diameter: 10 mm (nominal)

• Length & Bend Profile: OEM-specified routing shape

• Pressure Rating: Up to 8 bar (fluid) or vacuum rated to –1 bar

• Temperature Range: –40 °C … +150 °C

• Compatibility: Direct-fit for vehicles requiring PREXAparts P326289; verify via service manual or VIN

Installation Overview

1. Depressurize System: Safely drain or vent the circuit (coolant, fuel, etc.) before removal.

2. Remove Old Pipe: Disconnect fittings and clamps at both ends; note orientation and support points.

3. Clean Connections: Wipe mating surfaces and inspect for corrosion or damage.

4. Install New Pipe: Route P326289 into place, aligning bends with factory clips and brackets.

5. Secure Fittings: Fasten clamps or threaded connectors to manufacturer torque specifications.

6. Test for Leaks: Repressurize or refill the system and inspect all joints under operating conditions.