Windshield Glass 3V0 845 011 AJ

Restore your vehicle’s clarity and safety with the genuine windshield glass (part 3V0 845 011 AJ). Precision-engineered to Volkswagen Group specifications, this laminated front glass offers optimal optical performance, UV protection and impact resistance.

Key Benefits

• Exact OEM Fit
  Laser-profiled edges and pre-cut mounting points guarantee a seamless, no-trim installation into factory windshield channels.

• Laminated Safety Glass
  Dual layers of tempered glass bonded with a clear PVB interlayer prevent shattering on impact, maintaining structural integrity and occupant protection.

• Integrated UV Filter
  Built-in UV-absorbing layer reduces interior fading and blocks harmful ultraviolet rays without tinting visibility.

• Acoustic Dampening
  The PVB interlayer also reduces road and wind noise, contributing to a quieter cabin environment.

• Climate Durability
  Engineered to withstand thermal stresses and temperature extremes from –40 °C to +80 °C without delaminating.

Technical Specifications

• Part Number: 3V0 845 011 AJ

• Material: Laminated automotive safety glass with PVB interlayer

• Dimensions: OEM-specified contour for precise fit in VW model windscreen channel

• UV Transmittance: ≤ 1% UV-A and UV-B permeability

• Optical Clarity: Meets ISO 3537 distortion standards for clear vision

• Warranty: 24 months coverage against delamination and manufacturing defects

Installation Overview

1. Remove Old Glass: Carefully cut away old urethane and lift out the damaged windshield.

2. Prepare Pinch Weld: Clean and prime the vehicle flange to ensure proper urethane adhesion.

3. Apply Urethane Sealant: Dispense a continuous bead of OEM-approved windshield adhesive.

4. Position New Glass: Align pre-cut mounting holes and press the windshield into the urethane, seating evenly along the pinch weld.

5. Cure Time: Allow the adhesive to cure per manufacturer instructions before driving.

6. Inspect Seal: Verify uniform bead and leak-free installation before road use.