Audi Headlight Mount Bracket – Part No. 8T0941453D

Restore perfect beam aim and eliminate headlight shake with the genuine left-hand headlight support bracket engineered by Audi for the late-model A4 and A5 range. This moulded mount plate locks the lamp securely to the front panel, preserving gap uniformity and ensuring your lighting system meets OE safety standards.

Key Benefits

• OEM precision fit – factory-moulded locating pins and clip points align with original bumper and slam-panel holes; no drilling or adaptation.

• Impact-resistant polymer – high-strength ABS/PC blend shrugs off vibration, road debris and temperature cycling without cracking.

• Correct beam geometry – rigid mounting prevents lamp droop, keeping light cut-off at the legal height and reducing glare to oncoming traffic.

• Weatherproof design – integrated drainage channels redirect moisture away from sensitive lamp electronics.

• Two-year Audi parts warranty – full dealership backing for peace of mind.

Vehicle Compatibility

• Audi A4 B8 facelift (2013-2016) – Saloon, Avant and Allroad

• Audi A5 / S5 / RS5 8T (2013-2017) – Coupé, Cabriolet and Sportback

• Suitable for models with or without Xenon/LED headlamps; verify left-hand position before ordering.

Confirm by matching the stamped number 8T0 941 453 D on your original bracket.

Technical Details

• Location: Front left (driver side on LHD vehicles)

• Material: Glass-fiber-reinforced ABS plastic

• Finish: Satin black, paintable if required

• Fastening: Re-uses OE Torx screws and push-clips

• Supersedes: 8T0-941-453-A / -B / -C revisions

• Weight: ≈ 120 g

• Warranty: 24 months against manufacturing defects

Quick Installation Guide

1. Remove bumper cover and loosen headlamp screws.

2. Release damaged bracket from the lamp housing.

3. Align new bracket; engage locating tabs and secure with OE screws (tighten to 2 Nm).

4. Re-fit headlamp, check panel gaps, and torque mounting bolts to 8 Nm.

5. Reinstall bumper, reconnect wiring, and verify beam alignment.