Rear tow-hook cover

Give your A4’s tail a seamless finish and keep dirt out of the recovery-eye recess with the genuine rear tow-hook cover (part 8K5 807 441 GRU, also printed 8K5807441GRU). This primed insert clicks straight into the bumper’s pre-moulded aperture, restoring the original contour and safeguarding the threaded tow-eye boss from corrosion

14.83 EUR
ar PVN 21%
Noliktavā 1
Available The item is on site at our office - you can pick it up right away.
Kods 8K5807441GRU
Ražotājs VAG

Rear Tow-Hook Cover 8K5 807 441 GRU

Give your A4’s tail a seamless finish and keep dirt out of the recovery-eye recess with the genuine rear tow-hook cover (part 8K5 807 441 GRU, also printed 8K5807441GRU). This primed insert clicks straight into the bumper’s pre-moulded aperture, restoring the original contour and safeguarding the threaded tow-eye boss from corrosion.

Key Benefits

  • OEM-exact fit – moulded locator tangs and spring clips align perfectly with the rear bumper; installs in seconds, no tools required.

  • Impact-resistant ABS/PP – flexible polymer shrugs off stone chips, road salt and car-wash chemicals without cracking.

  • Factory primer coat – supplied in light-grey primer for rapid colour matching or discreet matte-black installation.

  • Aerodynamic integrity – smooths the bumper surface, preventing drag-inducing turbulence behind the car.

  • Warranty-backed – covered by Audi Genuine Parts for 24 months against manufacturing defects.

Vehicle Compatibility

MakeModelChassisModel YearsNotes
AudiA4 Sedan & AvantB8 / 8K2008 → 2015Standard rear bumper (non-S-line)
AudiS4 Sedan & AvantB8 / 8K2009 → 2015Non-S-line bumper


Check the number 8K5 807 441 GRU on your original cap or confirm via VIN before ordering.

Technical Specifications

ItemDetail
Part number8K5 807 441 GRU (8K5807441GRU)
PositionRear bumper – tow-eye opening
MaterialUV-stable ABS/PP polymer
FinishElectro-coat primer, paint-ready
FasteningBuilt-in spring clips
Approx. weight35 g
Warranty24 months


Quick Installation Guide

  1. Align the cover with the bumper aperture, ensuring the hinge side faces upward.

  2. Press gently until both spring clips click into place.

  3. Paint if desired, following Audi refinishing guidelines (P400 wet-sand, two-stage colour / clear).

  4. Inspect after the first wash to confirm secure seating.

Specifikācija nav atrodama

0 Atjaunināts