Cabin-pressure vent

Stop musty odours, fogged glass and door-slam “thumps” with the genuine cabin-pressure vent (part 7N0 819 465 F / 7N0819465F). Hidden behind the rear bumper skin, this one-way grille lets stale air escape while its rubber flaps block water splash and dust, keeping your MPV’s interior fresh and quiet.

15.98 EUR
ar PVN 21%
Noliktavā 1
Available The item is on site at our office - you can pick it up right away.
Kods 7N0819465F
Ražotājs VAG

Rear Quarter-Panel Pressure-Relief Vent 7N0819465F

Stop musty odours, fogged glass and door-slam “thumps” with the genuine cabin-pressure vent (part 7N0 819 465 F / 7N0819465F). Hidden behind the rear bumper skin, this one-way grille lets stale air escape while its rubber flaps block water splash and dust, keeping your MPV’s interior fresh and quiet.

Key Benefits

FeatureWhy It Matters
OEM airflow geometryEngineered louvers balance cabin pressure so doors close effortlessly and HVAC vents flow freely.
Splash-proof rubber flapsThree self-closing membranes seal out road spray, snow and exhaust fumes.
UV-stable ABS housingResists cracking and warping from heat cycles and winter salt.
Quick clip-on fitMoulded tabs snap into the quarter-panel aperture; no sealant or drilling needed.
Warranty-backed24-month Volkswagen Group parts guarantee for total peace of mind.


Vehicle Compatibility
BrandModelChassisYearsLocation
VolkswagenSharan II7N2010 → 2022Rear quarter-panel, LH & RH
SEATAlhambra II7N2010 → 2022Rear quarter-panel, LH & RH
(Also used on select VW Golf VII, Tiguan II, Audi Q3 2019+ – confirm by VIN)


Supersedes earlier vents 7N0-819-465-D / -E. Always match the number 7N0819465F on your original part before ordering.

Technical Specifications

SpecificationDetail
Part Number7N0 819 465 F (7N0819465F)
MaterialBlack ABS frame, EPDM rubber flaps
MountingSnap-in clips + 1 Torx T20 screw (vehicle-dependent)
Overall Size140 × 85 × 23 mm
Weight≈ 110 g
Warranty24 months


Installation Snapshot

  1. Remove rear bumper corner or inner-panel trim for access.

  2. Release old vent by squeezing lock tabs; clean aperture.

  3. Press new vent into place until clips click.

  4. Reassemble trim, check flap movement, and road-test for silent door closure.

Specifikācija nav atrodama

0 Atjaunināts